Projector codes

Universal remote codes for projectors

The short answer

Projector codes come from Jasco's published GE lists and are filed under the auxiliary or video device keys rather than TV. Find the CL version inside your remote's battery compartment, then use the matching block below.

180 codes listed62 brandsUpdated 11 September 2026

Projectors are in some ways the easiest equipment to pair. Most have more than one infrared receiver — commonly one at the front and one at the rear — and a projected image gives an unusually clear signal that a command landed.

What makes them awkward is the power behaviour, which is unlike anything else in a living room and regularly makes a correct code look wrong.

Use the right device key first

AUXTVVCR

Projectors have no standard device key. Jasco lists them under auxiliary and video categories, so try AUX first; some remotes expect the TV key instead.

Projector codes by brand

Find your equipment brand, then the block naming the remote you are programming. Codes are not interchangeable between remote brands.

Optoma projectors

14 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Christie projectors

11 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Benq projectors

10 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

3m projectors

8 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Epson projectors

8 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sharp projectors

8 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Panasonic projectors

7 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

LG projectors

6 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sanyo projectors

6 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Acer projectors

5 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Dell projectors

5 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

JVC projectors

5 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Toshiba projectors

5 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Viewsonic projectors

5 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Canon projectors

4 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Hitachi projectors

4 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Infocus projectors

4 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Runco projectors

4 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Casio projectors

3 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Mitsubishi projectors

3 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

NEC projectors

3 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Philips projectors

3 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sony projectors

3 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Vankyo projectors

3 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Proxima projectors

2 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Pyle projectors

2 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Samsung projectors

2 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sim2 projectors

2 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Yamaha projectors

2 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Aaxa projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Adj projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Aehr projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Asus projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Avermedia projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Avio projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Barco projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Bigasuo projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Bomaker projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Boxlight projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cibest projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cocar projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cooau projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Coolux projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Dbpower projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Dr.j Professional projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Eiki projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Goodee projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Hp(hewlett Packard) projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Lenovo projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Pioneer projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Ragu projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

RCA projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Ricoh projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Seleco projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Smart projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Topvision projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Toumei projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Vivitek projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Wallis Universal projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Wowoto projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Yaufey projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Zutest projectors

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

The power test does not work the way you expect

Most projectors need the power command twice to switch off, as a confirmation step, and then run a cooling cycle during which they ignore every further command including power on. A single press that appears to do nothing, followed by an unresponsive unit, is normal behaviour rather than a wrong code.

Test with the menu or input key instead. Both respond immediately and neither triggers a cooling cycle you then have to wait out.

Two receivers, and one of them is behind you

Ceiling-mounted projectors are usually pointed away from the seating position, but most have a rear infrared receiver precisely for this. If the remote fails from the sofa it is often aim rather than code — try bouncing the signal off the screen, which works surprisingly well.

This is also why projectors tolerate a weak or partly obstructed remote better than televisions do: there is more than one way for the command to arrive.

When it doesn't work

The projector ignores everything after I press power

It is in its cooling cycle, which can run for a minute or more and blocks all commands including power on. Wait for the fan to stop before concluding anything about the code.

Power needs two presses

Normal — most projectors ask for confirmation before shutting down. This is not a sign of a faulty code or a failing remote.

Nothing responds from the seating position

Aim at the screen rather than the projector. The reflected signal reaches the front receiver, and most ceiling-mounted units also have a rear receiver facing the audience.

Still nothing? The full diagnostic starts by proving whether the remote transmits at all.

Troubleshooting guide

Projector code FAQs

Which device key do I use for a projector?

There is no standard key. Jasco files projectors under the auxiliary and video categories, so try AUX first; some remotes expect the TV key instead.

Why does my projector need two presses to switch off?

Most projectors ask for confirmation before shutting down, then run a cooling cycle during which they ignore all commands. Both behaviours are normal and neither indicates a wrong code.

How should I test a projector code?

With the menu or input key rather than power. Both respond immediately, and neither starts a cooling cycle you then have to wait out before testing again.

The remote does not work from my sofa — is the code wrong?

Probably not. Aim at the screen instead: the reflected signal reaches the projector's front receiver, and most ceiling-mounted units have a rear receiver facing the seating position too.

Other equipment

Soundbar codes Blu-ray and DVD player codes Cable box and set-top box codes Streaming player codes AV receiver codes

Codes by TV brand

Samsung TV codes LG TV codes Sony TV codes Philips TV codes Panasonic TV codes Toshiba TV codes Sharp TV codes Hisense TV codes TCL TV codes Vizio TV codes Insignia TV codes