Cable box codes

Universal remote codes for cable and satellite boxes

The short answer

The set-top box codes below come from Jasco's published GE lists and RCA's code finder, split by GE code-list version and RCA revision. On GE remotes, Jasco says any device button can control a compatible device. For Sky, note that Sky says it no longer provides the codes that let Sky+ remotes control TV volume.

8377 codes listed525 brandsUpdated 15 September 2026how we check

Check the version or revision under your remote's batteries, find your box's brand and try its codes in order, testing the buttons you use.

Where a provider documents its own remote, this page links that documentation.

Use the right device key first

SATCBLSTBAUX

On GE remotes, Jasco says any device button can control a compatible device. On the RCA RCR311W, cable and satellite boxes are programmed on the SAT•CBL key.

Cable box and set-top box codes by brand

Find your equipment brand, then the block naming the remote you are programming. Codes are not interchangeable between remote brands.

Motorola cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Philips cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Scientific Atlanta cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Directv cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cisco cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

RCA cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Samsung cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Pace cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Comcast cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Toshiba cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Zenith cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cox cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Echostar cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Panasonic cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Charter cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Time Warner cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Jerrold cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Amino cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cablevision cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Dish Network cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Hughes Network Systems cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Pioneer cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sony cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Arris cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Proscan cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Bell cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Dishpro cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Mediacom cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cable One cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Shaw cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Suddenlink cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Channel Master cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Bright House cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

General Instrument cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

TiVO cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Xfinity cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Rogers cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Verizon cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sky Network cable and satellite boxes

47 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Star Choice cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Expressvu cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

JVC cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

LG cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

ADB cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Hitachi cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Magnavox cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Mitsubishi cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Thomson cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Universal cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GOI cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Digeo cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Insight cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Knology cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Myrio cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cogeco cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Evolution cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

HTS cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Humax cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

RCN cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Digital Stream cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Philips-Magnavox cable and satellite boxes

30 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Spectrum cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

WideOpenWest cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

WOW! cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Bell ExpressVu cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Fortec Star cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Tivax cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Insignia cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Telus cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Voom cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Dish Network System cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Moxi cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Technicolor cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Wave Broadband cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Entone cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sylvania cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Viewstar cable and satellite boxes

25 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Next Level cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Service Electric cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Videotron cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Shaw Direct cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Adelphia cable and satellite boxes

22 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Charter Communications cable and satellite boxes

22 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Archer cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Atlantic Broadband cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Hamlin cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

RadioShack cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Zinwell cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Ge（general Electric） cable and satellite boxes

20 codes

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Gridlink cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Lasonic cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Memorex cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Realistic cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Goodmind cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Pansat cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Philco cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sansonic cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sudden Link cable and satellite boxes

19 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

ABC cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Buckeye Cable System cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Frontier cable and satellite boxes

18 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Grande Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Radio Shack cable and satellite boxes

18 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sky cable and satellite boxes

18 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Alpha Digital cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Gemini cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

MetroCast Cablevision cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

SureWest cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Unika cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Coolsat cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Coship cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Director cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Dreambox cable and satellite boxes

16 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Primestar cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sasktel cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Venturer cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Zentech cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Airlink 101 cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Artec cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

CASTi cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Daewoo cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Pinnacle cable and satellite boxes

15 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Winegard cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Americast cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Drake cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Illico cable and satellite boxes

14 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Optimum cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Starcom cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Apex Digital cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Daytek cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

EastLink cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

I3 Micro cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Oak cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sejin cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Ultimate Tv cable and satellite boxes

13 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Uniden cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

AMTC cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Antronix cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Apex cable and satellite boxes

12 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

ATMC cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cincinnati Bell cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cox Digital Cable cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Digiwave cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Emtec cable and satellite boxes

12 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE (General Electric) cable and satellite boxes

12 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Globecast cable and satellite boxes

12 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Huawei cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Shentel cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sts cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Triax cable and satellite boxes

12 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Armstrong cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Bell South cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Blue Ridge Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Century cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Coby cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

MicroGEM cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

MTS cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Paragon cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

U-verse cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Access Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

AT&T U-Verse cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cetomer cable and satellite boxes

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Frontier Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE (general Electric) cable and satellite boxes

10 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Hughes Network cable and satellite boxes

10 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Novaplex cable and satellite boxes

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Prosat cable and satellite boxes

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Star Sight cable and satellite boxes

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sunkey cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Westman Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Comporium cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Comtronics cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Contec cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

General Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Go Video cable and satellite boxes

9 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

KoolConnect cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Megacable cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Movie Time cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

NET cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Reach Broadband cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Schurz Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sprucer cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

TDS cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Telefonica cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

TVS Cable cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Wavevision cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Zito Media cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Allegro cable and satellite boxes

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Altice cable and satellite boxes

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

CenturyLink cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Dx Antenna cable and satellite boxes

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Ematic cable and satellite boxes

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Fujitsu cable and satellite boxes

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Luxor cable and satellite boxes

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Midcontinent Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Pulsar cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Quasar cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Runco cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

TDS Telecom cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Viewsat cable and satellite boxes

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Bell Fibe TV cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Claro cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Homecast cable and satellite boxes

7 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Inter Mountain Cable cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Novus cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sharp cable and satellite boxes

7 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Tva cable and satellite boxes

7 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Ventura cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Vivo cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Adth cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Altice USA cable and satellite boxes

6 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Bell Aliant cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Bendbroadband cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Buckeye cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cable America cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cable Axion Digitel cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cabletenna cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cableview cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Chaparral cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Chapparal cable and satellite boxes

6 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Charter Digital cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Citizen cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cox Communications cable and satellite boxes

6 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Eagle Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Eastern cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Everquest cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Geosatpro cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Lumos Networks cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Massillon Cable cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Midco cable and satellite boxes

6 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Net cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

NewWave Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Now Tv cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Nsc cable and satellite boxes

6 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

NU Telecom cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Regency cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Rembrandt cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Samsonic cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Signal cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Signature cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Starchoice cable and satellite boxes

6 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Stargate cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Tandy cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Thompson cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Tv86 cable and satellite boxes

6 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Visiontec cable and satellite boxes

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Windjammer Cable cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Access Hd cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Arion cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Astro cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Bell Satellite TV cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

CCAP cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cebridge cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Charter Spectrum cable and satellite boxes

5 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cheyenne cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Echosphere cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Evolution Digital cable and satellite boxes

5 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Garrard cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Gc Electronics cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

General Instruments cable and satellite boxes

5 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Hns cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

ILO cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Jasco cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Kenwood cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

MAG cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Medion cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Microyal cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Movistar cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Neosat cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Omegasat cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Orasat cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Polaroid cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sierra I Ii Iii cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Skardin cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sky Brasil cable and satellite boxes

5 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sky Mexico cable and satellite boxes

5 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sl Marx cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Standard cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Super Guide cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Tbaytel cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Teleview cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Telsat cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Texscan cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Time Warner Cable cable and satellite boxes

5 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

United cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

United Cable cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Video Tech cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Visionetics cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Vudu cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Wow cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Xtream cable and satellite boxes

5 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Zenith Network cable and satellite boxes

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Adams Cable TV cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Azbox cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Bell MTS cable and satellite boxes

4 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Buckeye Broadband cable and satellite boxes

4 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cablemas cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Casio cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Confluent cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Consolidated Communications cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Crossdigital cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Home2Us cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

INet Access cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Media One cable and satellite boxes

4 codes

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Mediaone cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Minerva cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Nbox cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Negravision cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Netgem cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Openbox cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

PCT cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA Dta800b1 cable and satellite boxes

4 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Samsung Sir-T165 cable and satellite boxes

4 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sky Hd cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sling Media cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Source Cable cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sparklight cable and satellite boxes

4 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Surewest cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Transparent Video System cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Ultrasat cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Wd (Western Digital) cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Web cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Wegener cable and satellite boxes

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Allegiance Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Amplica cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Bright House Networks cable and satellite boxes

3 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Broadstripe cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cablems cable and satellite boxes

3 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cadence cable and satellite boxes

3 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cass Cable cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Choice Cable TV cable and satellite boxes

3 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Clearmax cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Digital Music Express cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Fidelity Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Goi cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Gospell cable and satellite boxes

3 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Gtd cable and satellite boxes

3 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Hawaiian Telcom cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Homeworx cable and satellite boxes

3 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Inet Access cable and satellite boxes

3 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Kaon cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Kingbox cable and satellite boxes

3 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Liteon cable and satellite boxes

3 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

M2 cable and satellite boxes

3 codes

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Manhattan cable and satellite boxes

3 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Mediastream cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Mi-Connection cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Mid-Hudson Cable cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Nagravision cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

New Wave cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Northland Communications cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Nowtv cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

NSC cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Oi TV cable and satellite boxes

3 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Onkyo cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Replaytv cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sagemcom cable and satellite boxes

3 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Seiki cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Torx cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Totalplay cable and satellite boxes

3 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

TV86 cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

TVA Digital cable and satellite boxes

3 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

UltimateTV cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

V-Tech cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Videoway cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

View Star cable and satellite boxes

3 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Vtech cable and satellite boxes

3 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

VTR cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

WEHCO Video cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Wideopenwest cable and satellite boxes

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Windstream cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

WNC cable and satellite boxes

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Amper cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Apple cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Astound Broadband cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Bein cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cablevision Victoria cable and satellite boxes

2 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Casti cable and satellite boxes

2 codes

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Centronics cable and satellite boxes

2 codes

RCA

Revision 25582 / 25641

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25592 / 25651

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Champ cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Colour Voice cable and satellite boxes

2 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Deltasat cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Dgtec cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Directv Dre cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Dishnet cable and satellite boxes

2 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Dmt cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Envision cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Epson cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

General Instrument (Gi) cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Globalsat cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GoldStar cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Google cable and satellite boxes

2 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 26102

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Gradiente cable and satellite boxes

2 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Hfc cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Hilton cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Htib cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Iconq cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Infocus cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Iview cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Jynxbox cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Koolconnect cable and satellite boxes

2 codes

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Layer3 TV cable and satellite boxes

2 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

LiteOn cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Mediasonic cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Metrocast cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Microsoft cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Mxq cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Neotion cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Net Digital cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Oi cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Omega cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Oxford cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Philo cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Prime cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Proscan Pshd105 cable and satellite boxes

2 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

RTC cable and satellite boxes

2 codes

RCA

Revision 25582 / 25641

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25592 / 25651

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sagem cable and satellite boxes

2 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Skybox cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Skymaster cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sogetel cable and satellite boxes

2 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sonicview cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

ST cable and satellite boxes

2 codes

RCA

Revision 26011

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 26211

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Standard Component cable and satellite boxes

2 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Star Track cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

STS cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sylvania 6900dtd cable and satellite boxes

2 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Telegenic cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

TVision Home cable and satellite boxes

2 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

UNE cable and satellite boxes

2 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Vestel cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Videocon cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Viewsonic cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Vision cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Western Digital cable and satellite boxes

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Xbox cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Zenith Dtv1080 cable and satellite boxes

2 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Zte cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Zutest cable and satellite boxes

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Airlink101 cable and satellite boxes

1 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Alphastar cable and satellite boxes

1 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

AZ America cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cable Axion Digital cable and satellite boxes

1 codes

RCA

Revision 25972

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cablecom Mexico cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cablevision Du Nord cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Convenient cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Digitalstream cable and satellite boxes

1 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

DISH cable and satellite boxes

1 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Dish Mexico cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Embratel cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Express Vu cable and satellite boxes

1 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GCElectronics cable and satellite boxes

1 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Google Fiber cable and satellite boxes

1 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GVT cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Hughes Netwrok Systems cable and satellite boxes

1 codes

RCA

Revision 25604

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Ignite TV cable and satellite boxes

1 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Infomir cable and satellite boxes

1 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Intv cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Izzi Telecom cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Kaon Media cable and satellite boxes

1 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Kathrein cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

LAYER3 cable and satellite boxes

1 codes

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Liberty Cablevision cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Maxcom cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Megaseal cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Nagra cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

NEC cable and satellite boxes

1 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Netsat cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Orby TV cable and satellite boxes

1 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Pioneer Sh-D505 cable and satellite boxes

1 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sony Sathd 100 cable and satellite boxes

1 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Star cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Starquest cable and satellite boxes

1 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

STS1 cable and satellite boxes

1 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

STS2 cable and satellite boxes

1 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

STS3 cable and satellite boxes

1 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

STS4 cable and satellite boxes

1 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Supercanal cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Supernova cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Tele Red cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

TeleCable cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Telecentro cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Televisa cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Telmex cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Tusa cable and satellite boxes

1 codes

RCA

Revision D770 / D771

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

TV Cable cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Via Embratel cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

VMedia cable and satellite boxes

1 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

WADECOM cable and satellite boxes

1 codes

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Wnc cable and satellite boxes

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Xavi cable and satellite boxes

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Z-Trak cable and satellite boxes

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Which button to use

Jasco says a GE remote's device buttons can be programmed to control any compatible A/V device. On the RCA RCR311W, cable boxes and satellite receivers go on the SAT•CBL key.

Source: Jasco: GE universal remotes FAQ

Source: RCA: RCR311W universal remote owner's manual

Test the buttons you use

Jasco says some codes operate only a few of a device's functions, and RCA says different codes provide different levels of functionality. If a button you need doesn't respond, try the next code.

Source: Jasco: GE universal remote codes and programming

Source: RCA: RCR311W universal remote owner's manual

Sky+ remotes

Sky says it no longer provides the codes that let Sky+ remotes control the volume on your TV.

You can still program a Sky+ remote to control the Sky box: press TV, hold Select and i together until the light flashes twice, press 1, press Select again (the light flashes), then press Sky.

Source: Sky: program your Sky+ remote to control your Sky box

When it doesn't work

Only some buttons work

Jasco and RCA both say a code may control only some functions. Try the next code for your box's brand.

My box isn't in the code list

Use your remote's code search. The guide to programming a universal remote without codes has the steps for GE, One For All and RCA remotes.

A Sky+ remote won't control the TV's volume

Sky says it no longer provides the codes for that.

Still nothing? The full diagnostic starts by proving whether the remote transmits at all.

Troubleshooting guide

Cable box and set-top box code FAQs

Which button do I use for a cable box?

On GE remotes, Jasco says any device button can be programmed for a compatible device. On the RCA RCR311W, use the SAT•CBL key.

Can a Sky+ remote control my TV's volume?

Sky says it no longer provides the codes for that. It still documents programming a Sky+ remote to control the Sky box.

Where do these cable box codes come from?

From Jasco's published GE lists and RCA's code finder. Each code table links its source.