Insignia · TV codes

Universal remote codes for Insignia TVs

The short answer

The Insignia TV codes on this page come from RCA and GE's published lists, grouped by remote. Find your remote's model, version or revision in the battery compartment, then try that list's Insignia codes in order.

348 codes listed31 remote modelsUpdated 15 September 2026how we check

Codes belong to the remote, not the equipment: each remote maker publishes its own list, and a code from one list won't program another maker's remote. Use the block below that names your remote.

If your remote isn't listed, or none of its codes work, use its code search. The guide to programming a universal remote without codes has the manufacturer's steps for GE, One For All and RCA remotes.

Try these codes first

28911

First code in the list for the Revision R271U1 / R271U2.

12219

Second code in the list for the Revision R271U1 / R271U2.

68515

First code in the list for the Revision R341U1.

22011

Second code in the list for the Revision R341U1.

1564

First code in 5 of the lists below, including the Revision 31794.

0171

Second code in 3 of the lists below, including the Revision 31794.

Code lengths in these lists (RCA: 4 and 5-digit; GE: 4-digit). Codes only work on the remote whose list they come from, so use the block that names your remote and enter each code exactly as it's shown.

Insignia TV codes by remote

Find the block that names your remote. Codes are not interchangeable between remote brands — each one indexes a different internal table.

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 31794

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 20047

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 31862

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25604

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 26102

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 20052

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 20022

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 20037

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 20473 / 20474

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25582 / 25641

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25394

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25592 / 25651

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 26011

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25384

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 20189

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 26211

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 20174 / 20301 / 20401

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25612

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25972

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25947

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 202815

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 31503

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25693

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Every Insignia TV code on this page

All 110 unique codes, shortest first. A code only works on the remote whose list it comes from, so use the tables above when your remote is listed.

Brands whose codes overlap with Insignia

Counted inside each remote's own list. Of the 299 Insignia code entries listed under 10 brands or fewer, these brands share the most. If your remote's list has no working Insignia code, these brands' codes in the same list are the ones worth trying.

Dynex
62 shared code entries
Sylvania
31 shared code entries
Polaroid
30 shared code entries

If your TV runs Roku TV

Roku publishes its own codes for universal remotes controlling a Roku TV: 2891 for GE, 10885 for Inteset, 2891 or 3851 for onn., and 11564, 12434, 387, 12049 or 11756 for RCA and Voxx. Roku notes some remotes give only basic control (power, volume and input).

Source: Roku: set up a cable, satellite or universal remote to control a Roku TV

When it doesn't work

No code from your remote's list works

Check you're using the list for your remote's model, version or revision. Jasco looks GE codes up by the CL version under the batteries, and RCA by the revision number under the battery.

Some buttons work, others don't

Jasco says some codes operate only a few of a device's functions, and RCA says different codes give different levels of functionality. Try the next code in your remote's list.

The GE remote's light doesn't behave as described

Jasco says this is most commonly caused by bad batteries, even brand-new ones. Try a different set before changing codes.

Still nothing? Work through the full diagnostic — it starts by proving whether the remote transmits at all.

Troubleshooting guide

Insignia TV remote code FAQs

What is the universal remote code for a Insignia TV?

It depends on your remote. This page lists every verified Insignia TV code by remote, from RCA and GE's published lists, grouped by version or revision.

Which button do I program for a Insignia TV?

Follow the steps for your remote shown beside its codes. On GE remotes, Jasco says any device button can be programmed to control any compatible device.

Do I have to re-enter the code after changing the batteries?

It depends on the remote. RCA's D771 manual, for example, notes that reprogramming may be required after the batteries are replaced, so write your code down once it works.

Where do these codes come from?

From the manufacturers themselves: One For All's published code list for the URC 1210 Contour TV, Jasco's published lists for GE remotes in versions CL3 to CL6, and RCA's code finder by revision number. Each table links its source document. Codes we cannot trace to a manufacturer are not published here at all.