Blu-ray / DVD codes

Universal remote codes for Blu-ray and DVD players

The short answer

The disc-player codes below come from Jasco's published GE lists and RCA's code finder, grouped by GE code-list version and RCA revision, so check the number under your remote's batteries first. On GE remotes, Jasco says any device button can control a compatible device.

8373 codes listed293 brandsUpdated 15 September 2026how we check

Find your remote's version or revision, then your player's brand, and try its codes in order. If the buttons you need don't respond, Jasco's advice is to try the next code.

Some RCA remotes share one key between a VCR and a DVD player, which is covered below.

Use the right device key first

DVDBDDISC

Remotes label disc keys differently. On GE remotes, Jasco says any device button can control a compatible device. On the RCA RCR311W, the VCR•DVD key controls either a VCR or a DVD player, and you choose which before programming.

Blu-ray and DVD player codes by brand

Find your equipment brand, then the block naming the remote you are programming. Codes are not interchangeable between remote brands.

Philips Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Samsung Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Toshiba Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sony Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Magnavox Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Panasonic Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Insignia Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

RCA Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Pioneer Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Yamaha Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

JVC Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Coby Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sharp Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Go Video Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

LG Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Onkyo Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Memorex Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Emerson Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sylvania Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Zenith Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Marantz Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Nexxtech Blu-ray and DVD players

90 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Hitachi Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Apex Digital Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Denon Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Apex Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Polaroid Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sanyo Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Daewoo Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Symphonic Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Funai Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Vizio Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Integra Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Durabrand Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Philco Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Centrios Blu-ray and DVD players

63 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

NAD Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Polk Audio Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Kenwood Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Xbox Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Microsoft Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

CyberHome Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Oppo Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Blu-Ray Blu-ray and DVD players

50 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Disney Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Philips-Magnavox Blu-ray and DVD players

46 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GPX Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Mitsubishi Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Audiovox Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Harman/Kardon Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sherwood Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Selectron Blu-ray and DVD players

40 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Broksonic Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Dynex Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Norcent Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Shinsonic Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Hd-Dvd Blu-ray and DVD players

36 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Konka Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Proscan Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Tevion Blu-ray and DVD players

35 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Aiwa Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Bose Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GoldStar Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Initial Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Technics Blu-ray and DVD players

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Dual Blu-ray and DVD players

30 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

KLH Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Koss Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sansui Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Diamond Vision Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Medion Blu-ray and DVD players

28 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Radio Shack Blu-ray and DVD players

28 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Teac Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Accurian Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GFM Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

LiteOn Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Mintek Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Venturer Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

ILO Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Lenoxx Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Oritron Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Presidian Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Rotel Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Allegro Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

California Audio Labs Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Hello Kitty Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Nesa Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Lasonic Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Rio Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Techwood Blu-ray and DVD players

22 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Urban Concepts Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Kawasaki Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

CineVision Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cyberhome Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Hiteker Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

JBL Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sonic Blue Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Akai Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Gradiente Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Theta Digital Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Blaupunkt Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Citizen Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Greenhill Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Grundig Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sears Blu-ray and DVD players

18 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

ESA Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

ONN Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Superscan Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Yamakawa Blu-ray and DVD players

17 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Classic Blu-ray and DVD players

15 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Curtis International Blu-ray and DVD players

15 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Proceed Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cinea Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Craig Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Portland Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Fisher Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Irradio Blu-ray and DVD players

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Maxent Blu-ray and DVD players

13 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Optimus Blu-ray and DVD players

13 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sampo Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Curtis Mathes Blu-ray and DVD players

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Pyle Blu-ray and DVD players

12 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Schneider Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Supersonic Blu-ray and DVD players

12 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

SVA Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

TiVO Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Bel Canto Design Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Haier Blu-ray and DVD players

11 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

JWin Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sova Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Viore Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Amw Blu-ray and DVD players

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Blue Parade Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Concept Blu-ray and DVD players

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cytron Blu-ray and DVD players

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Elta Blu-ray and DVD players

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Haaz Blu-ray and DVD players

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Linn Blu-ray and DVD players

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Olevia Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Rj Technology Blu-ray and DVD players

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Rosen Blu-ray and DVD players

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Shinco Blu-ray and DVD players

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Soundstorm Blu-ray and DVD players

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Sungale Blu-ray and DVD players

10 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

TruTech Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Astar Blu-ray and DVD players

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Desay Blu-ray and DVD players

9 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Helios Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Humax Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

NEC Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

SV2000 Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

TCL Blu-ray and DVD players

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Alco Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

General Electric Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Goldstar Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Kxd Blu-ray and DVD players

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Meridian Blu-ray and DVD players

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Orion Blu-ray and DVD players

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

ProVision Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Qwestar Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Regent Blu-ray and DVD players

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

United Blu-ray and DVD players

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Wharfedale Blu-ray and DVD players

8 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Axion Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Digix Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

DVD2000 Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Lexicon Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Logitech Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Proline Blu-ray and DVD players

7 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Tascam Blu-ray and DVD players

7 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Atvio Blu-ray and DVD players

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Boss Blu-ray and DVD players

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cetomer Blu-ray and DVD players

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Dvd 2000 Blu-ray and DVD players

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Element Blu-ray and DVD players

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE (General Electric) Blu-ray and DVD players

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Ge（general Electric） Blu-ray and DVD players

6 codes

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

JSI Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

McIntosh Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Mustek Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Protron Blu-ray and DVD players

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Westinghouse Blu-ray and DVD players

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

White-Westinghouse Blu-ray and DVD players

6 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

A-Trend Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Acesonic Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Ames Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Anaba Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Arrgo Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Aspire Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

B & K Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

BBK Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Cavs Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Citech Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Criterion Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Cybervision Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Denzel Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Drive Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Eigervision Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Escient Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Farenheit Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Gateway Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Kiss Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Liquidvideo Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Microvision Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Myron & Davis Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Nakamichi Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

New Acoustic Dimension Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Pacific Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

PianoDisc Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Piva Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Power Acoustik Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Reoc Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Saba Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

SEG Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Semp Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Terapin Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Tredex Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

US Logic Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Xenius Blu-ray and DVD players

5 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Audio Authority Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Blue Sky Blu-ray and DVD players

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Enterprise Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

ISymphony Blu-ray and DVD players

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Lecson Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Prosonic Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

RE-BL Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sensory Science Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sichler-Pearl Blu-ray and DVD players

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

WB Electronics Blu-ray and DVD players

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Zutest Blu-ray and DVD players

4 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Black Web Blu-ray and DVD players

3 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Bodysonic Blu-ray and DVD players

3 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Bostonacoustic Blu-ray and DVD players

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Changhong Blu-ray and DVD players

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Contel Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Curtis Blu-ray and DVD players

3 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 26102

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Digitrex Blu-ray and DVD players

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE (general Electric) Blu-ray and DVD players

3 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Harman Kardon Blu-ray and DVD players

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Infinity Blu-ray and DVD players

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Isymphony Blu-ray and DVD players

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Spectroni Blu-ray and DVD players

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Spectroniq Blu-ray and DVD players

3 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Advent Blu-ray and DVD players

2 codes

RCA

Revision 31794

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

AKAI Blu-ray and DVD players

2 codes

GE CL4 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

GE CL5 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Avorcent Blu-ray and DVD players

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Boston Acoustics Blu-ray and DVD players

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Bush Blu-ray and DVD players

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Chang Hong Blu-ray and DVD players

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Go Vision Blu-ray and DVD players

2 codes

RCA

Revision 20047

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 20174 / 20301 / 20401

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Hp(Hewlett Packard) Blu-ray and DVD players

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Majestic Blu-ray and DVD players

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Matsui Blu-ray and DVD players

2 codes

RCA

Revision 25972

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 25947

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Philips Magnavox Blu-ray and DVD players

2 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Popcorn Hour Blu-ray and DVD players

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Seiki Blu-ray and DVD players

2 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Sherwood Newcastle Blu-ray and DVD players

2 codes

RCA

Revision 31794

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision 20473 / 20474

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Tosaki Blu-ray and DVD players

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Vios Blu-ray and DVD players

2 codes

RCA

Revision R271U1 / R271U2

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

RCA

Revision R341U1

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Vtrek Blu-ray and DVD players

2 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

White Westinghouse Blu-ray and DVD players

2 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Afreey Blu-ray and DVD players

1 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Blackweb Blu-ray and DVD players

1 codes

GE CL6 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Buffalo Blu-ray and DVD players

1 codes

RCA

Revision 31794

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

D-Link Blu-ray and DVD players

1 codes

RCA

Revision 31794

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Directed Video Blu-ray and DVD players

1 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Electrohome Blu-ray and DVD players

1 codes

RCA

Revision 20473 / 20474

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

HitPlus Blu-ray and DVD players

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

HP Blu-ray and DVD players

1 codes

GE CL3 code list

All GE codes →

Programming sequence

6 steps

1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
3
Switch the device on manually and point the remote at it.
4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
6
Press POWER to test. If nothing happens, repeat with the next code for your brand.

Jensen Blu-ray and DVD players

1 codes

RCA

Revision 31794

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Loewe Blu-ray and DVD players

1 codes

RCA

Revision 31794

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Naxa Blu-ray and DVD players

1 codes

RCA

Revision 26102

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Prima Blu-ray and DVD players

1 codes

RCA

Revision 31794

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Semp Toshiba Blu-ray and DVD players

1 codes

RCA

Revision 26207

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

UrbanConcepts Blu-ray and DVD players

1 codes

RCA

Revision 25947

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

VisionQuest Blu-ray and DVD players

1 codes

RCA

Revision R3F802

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Zektor Blu-ray and DVD players

1 codes

RCA

Revision 20047

All RCA codes →

Programming sequence

6 steps

1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
2
Look your device up in the list for that revision. Codes do not carry between revisions.
3
Switch the device on manually and point the remote at it.
4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.

Test the buttons you'll use

Jasco says some codes operate only a few of a device's functions, and RCA says different codes provide different levels of functionality. Test play, pause and the other buttons you use, and try the next code if they don't respond.

Source: Jasco: GE universal remote codes and programming

Source: RCA: RCR311W universal remote owner's manual

RCA remotes with a shared VCR•DVD key

On the RCA RCR311W, the VCR•DVD key can control only one component. To choose, hold VCR•DVD, press 2 for a VCR or 3 for a DVD player, then release; the ON•OFF key blinks four times.

RCA lists combo units such as TV/DVDs in their own section of its code lists and says to try those codes first, programming the TV and VCR•DVD keys separately.

Source: RCA: RCR311W universal remote owner's manual

When it doesn't work

Only some buttons work

Jasco and RCA both say a code may control only some functions. Try the next code for your player's brand.

My player's brand isn't listed

Use your remote's code search. The guide to programming a universal remote without codes has the steps for GE, One For All and RCA remotes.

An RCA remote controls the VCR instead of the DVD player

On the RCR311W, set the VCR•DVD key to DVD first: hold VCR•DVD, press 3, and release.

Still nothing? The full diagnostic starts by proving whether the remote transmits at all.

Troubleshooting guide

Blu-ray and DVD player code FAQs

Which button do I use for a Blu-ray player?

On GE remotes, Jasco says any device button can be programmed for a compatible device. On the RCA RCR311W, use the VCR•DVD key after setting it to DVD.

What is the universal remote code for a Sony Blu-ray player?

The Sony disc-player codes on this page come from Jasco's published GE lists and RCA's code finder, split by your remote's version or revision. Try them in order and test the buttons you use.

How do I program a TV/DVD combo?

RCA says to try the codes in the combo section of its code lists first, programming the TV and VCR•DVD keys separately.