Magnavox · TV codes
Universal remote codes for Magnavox TVs
The short answer
The Magnavox TV codes on this page come from RCA, One For All and GE's published lists, grouped by remote. Find your remote's model, version or revision in the battery compartment, then try that list's Magnavox codes in order.
Codes belong to the remote, not the equipment: each remote maker publishes its own list, and a code from one list won't program another maker's remote. Use the block below that names your remote.
If your remote isn't listed, or none of its codes work, use its code search. The guide to programming a universal remote without codes has the manufacturer's steps for GE, One For All and RCA remotes.
Try these codes first
First code in the list for the Revision R271U1 / R271U2.
Second code in the list for the Revision R271U1 / R271U2.
First code in the list for the Revision R341U1.
Second code in the list for the Revision R341U1.
First code in 6 of the lists below, including the Revision 31794.
Second code in 4 of the lists below, including the Revision 31794.
Code lengths in these lists (RCA: 4 and 5-digit; One For All: 4-digit; GE: 4-digit). Codes only work on the remote whose list they come from, so use the block that names your remote and enter each code exactly as it's shown.
Magnavox TV codes by remote
Find the block that names your remote. Codes are not interchangeable between remote brands — each one indexes a different internal table.
RCA
Revision R271U1 / R271U2
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision R341U1
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 31794
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision R3F802
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 20047
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 26207
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 31862
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 25604
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 26102
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision D770 / D771
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 20052
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 20022
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 20037
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 20473 / 20474
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 25582 / 25641
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 25394
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 25592 / 25651
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 26011
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 25384
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 20189
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 26211
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 20174 / 20301 / 20401
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 25612
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 25972
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 25947
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 202815
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 31503
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
RCA
Revision 25693
Programming sequence
6 steps- 1
Find the revision number under the battery. RCA identifies your code table by revision, not by model number.
- 2
Look your device up in the list for that revision. Codes do not carry between revisions.
- 3
Switch the device on manually and point the remote at it.
- 4
If your remote has a CODE SEARCH key: hold CODE SEARCH until the indicator light turns on, press the device key (the light blinks, then stays lit), and enter the code exactly as your revision's list shows it. The light turns off.
- 5
If it has no CODE SEARCH key, as on the D770 and D771: hold the device key down, enter the code, then release it.
- 6
Aim the remote at the device and press POWER (ON•OFF). If nothing happens, try the next code for your brand. Your owner's manual has the exact sequence for your model.
One For All
URC 1210 Contour TV
Programming sequence
6 steps- 1
Point the remote at the device and make sure the device is switched on.
- 2
Press and hold SET until the indicator light stays on.
- 3
Press and release the device key (TV, AUD, DVD or SAT).
- 4
Enter the 4-digit code from the list. The indicator blinks once per digit.
- 5
Press POWER. If the device turns off, press SET once to lock the code in.
- 6
If nothing happens, repeat from step 2 with the next code in the list.
GE
GE CL3 code list
Programming sequence
6 steps- 1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
- 2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
- 3
Switch the device on manually and point the remote at it.
- 4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
- 5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
- 6
Press POWER to test. If nothing happens, repeat with the next code for your brand.
GE
GE CL4 code list
Programming sequence
6 steps- 1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
- 2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
- 3
Switch the device on manually and point the remote at it.
- 4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
- 5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
- 6
Press POWER to test. If nothing happens, repeat with the next code for your brand.
GE
GE CL5 code list
Programming sequence
6 steps- 1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
- 2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
- 3
Switch the device on manually and point the remote at it.
- 4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
- 5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
- 6
Press POWER to test. If nothing happens, repeat with the next code for your brand.
GE
GE CL6 code list
Programming sequence
6 steps- 1
Open the battery compartment and read the version from the sticker under the batteries or on the cover — CL3, CL4, CL5 or CL6.
- 2
Use the code list for that version. Jasco is explicit that codes from the wrong version will not work.
- 3
Switch the device on manually and point the remote at it.
- 4
Hold SETUP — or whichever key your model's manual names — until the indicator stays lit.
- 5
Press the device key once (TV, DVD, AUX or CBL), then enter the code.
- 6
Press POWER to test. If nothing happens, repeat with the next code for your brand.
Every Magnavox TV code on this page
All 118 unique codes, shortest first. A code only works on the remote whose list it comes from, so use the tables above when your remote is listed.
Brands whose codes overlap with Magnavox
Counted inside each remote's own list. Of the 282 Magnavox code entries listed under 10 brands or fewer, these brands share the most. If your remote's list has no working Magnavox code, these brands' codes in the same list are the ones worth trying.
When it doesn't work
No code from your remote's list works
Check you're using the list for your remote's model, version or revision. Jasco looks GE codes up by the CL version under the batteries, and RCA by the revision number under the battery.
Some buttons work, others don't
Jasco says some codes operate only a few of a device's functions, and RCA says different codes give different levels of functionality. Try the next code in your remote's list.
The GE remote's light doesn't behave as described
Jasco says this is most commonly caused by bad batteries, even brand-new ones. Try a different set before changing codes.
Still nothing? Work through the full diagnostic — it starts by proving whether the remote transmits at all.
Troubleshooting guideMagnavox TV remote code FAQs
What is the universal remote code for a Magnavox TV?
On a One For All Contour TV, One For All's published Magnavox codes are 2800, in that order. RCA and GE remotes use their own lists, shown on this page by version or revision.
Which button do I program for a Magnavox TV?
Follow the steps for your remote shown beside its codes. On GE remotes, Jasco says any device button can be programmed to control any compatible device.
Do I have to re-enter the code after changing the batteries?
It depends on the remote. RCA's D771 manual, for example, notes that reprogramming may be required after the batteries are replaced, so write your code down once it works.
Where do these codes come from?
From the manufacturers themselves: One For All's published code list for the URC 1210 Contour TV, Jasco's published lists for GE remotes in versions CL3 to CL6, and RCA's code finder by revision number. Each table links its source document. Codes we cannot trace to a manufacturer are not published here at all.
Related code lists
Other equipment